POWER Bộ Máy Hàn Mini Màn Hình Lcd Tiện Lợi Nhanh Chóng

Giới thiệu POWER Bộ Máy Hàn Mini Màn Hình Lcd Tiện Lợi Nhanh Chóng

__________________♤Welcome Superparis Store♤_______________

✔Ready Stock!!Buy Now!
✔COD
✔Quality Checked
✔Best price
✈Shipping in 1 day

★Surprises for you★
☛Free Gifts:Follow Shop
❤“Like” 5 Items: Priority Shipping
✉Sent me Screenshot and Message on your order : "Free Gift"，if not will Miss

✌(Tip:We will be based on your guests in your country to send the corresponding adapter plug)
➷Wholesale retailers are welcome to negotiate long-term business with us!
__________________❀Product Information❀__________________

Feature:
1. Welding power can be powered by lithium battery or 12V car battery.
2. The controller adopts single chip microcomputer control, accurate output pulse, LCD display screen, can display welding parameters.
3. The soldering pen and the input wire are connected by U‑shaped cold‑pressed terminals, which is convenient for disassembly and replacement.
4. The controller adopts automatic welding mode, while retaining the manual trigger interface, you can choose according to your own usage.
5. The power board uses 2 ounces of copper, and the soldering pen wire and the input wire use 10AWG multi‑wire soft wire to increase the overcurrent capacity.
6. Five 300A MOS tubes are driven by imported special chips, and the MOS tubes can be used as fast as 20nS, which can switch quickly to prevent tube explosion.
7. The controller is mainly for welding 0.1mm to 0.15mm nickel‑plated steel strip, and the power input adds a 25V10000uF high‑frequency low‑resistance capacitor for energy compensation to increase stability.

Specification:
Item Type: Mini Spot WelderProduct Description:
1: This controller is mainly used for welding small battery repair power banks, power tools, model airplanes, etc.
2: This controller requires users to have a certain electronic basis and safety awareness.3: Although sufficient protection has been done for the drive of the MOS tube, it is inevitable that the explosion tube will appear during use. If there is a explosion tube, just replace one.
4: For those with high welding requirements, please change the welding power source. After actual testing, when the battery uses 3S, 40C, 5000mHA, it can weld 0.1mm nickel-plated steel strip and 0.15mm nickel-plated steel strip perfectly. The welding needle needs to be ground into a round head, the pressing force is reduced, and it can also be welded; When the battery uses 12V, 50AH car level, it can weld 0.15mm nickel-plated steel strip perfectly. Note that it is a car battery, not an ordinary lead-acid battery.Size: Approx. 0.1 ~ 0.15mm / 0 ~ 0.01in

Package List:
1 x Spot Welder1 x Connector2 x Power Input Line2 x Soldering Pen

Hình ảnh sản phẩm

Giá NPICK