Đầu Phun V6 Cho Máy In 3d - 24v / 0.4mm

Giới thiệu Đầu Phun V6 Cho Máy In 3d - 24v / 0.4mm

Hotend is equipped with NTC3950 thermistors, 24V 40W heater, 24V fan
24V powered V6 hotend can be used as upgrade to various 3d printers with 24V power supplies, as well as for DIY projects.
NTC 3950 Thermistor parameters:
Use TEMP Sensor number 11 in Marlin firmware.
Small Size: 1.25mmx2.0mm glass bead.
High accuracy: 1%.
Resistance value at 25°C=100K.
Wiring insulation: high temperature teflon/PTFE.
Wiring length: 1 meter.
Color as shown
material: metal
Package Contents:
1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle
1 x 24 40W Heater with 1 meter long wiring
1 x NTC3950 Thermistor wuth 1 meter long wiring
1 x Heatsink Shroud with High Speed Fan 3010 24V 0.13A
1 x One Meter long Bowden tubing 4mm OD 2mm ID.
1 x PC4-01 threaded 1/8 inch NPT fitting
1 x Thermal Protection Silicone SockOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Hình ảnh sản phẩm

Giá VIZSLASWAP