Supply voltage: DC 12V
Output power: 20A relay
Control accuracy: 0.1 Celsius
Output voltage: DC 12V
Dimensions: 48.5 * 40MM
Resolution:When temperature is 0.1 centigrade, the resolution is -9.9~99.9, other temperature segment is 1 Celsius
Static current: Max35MA, attract = 65MA current
Environmental requirements: -10 ~ 60 Celsius, Humidity 20% -85%
Refresh rate: 0.5S
Temperature range: -50-110 Celsius
High temperature protection: 0-110 Celsius
Measurement input: NTC (10K 0.5%) Waterproof Sensor
Temperature control mode: ON / OFF
Hysteresis accuracy: 0.1 Celsius
How to use:
Connect the power supply and the load, you can supply to the controller,
Is displayed as a measured temperature,
Press the SET button, the display flashes the temperature,
Press - to set the desired temperature,
After setting press SET to confirm return,
The controller automatically performs the relay by setting off!
Lights, LED status descriptions:
Indicator: Off The relay is switched off, Always indicate the relay is closed.
LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
Package Included:
1*Temperature Control Switch or 1*Switch shell